Sanyo PLC-XU47 Owners Manual - Page 33

Video Input Input Source Selection (Component, RGB Scart 21-Pin) Direct Operation Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer 2 ✳ Video COMPUTER button Computer 1 Computer 2 ✳ ✳ See Note on the bottom of this page. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 2 Press the Point d button to move the red arrow pointer to Computer 1, and then press the SELECT button. The Source Select Menu will appear. 3 Move the pointer to the correct input source and then press the SELECT button. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/ COMPONENT IN terminal with a ComponentVGA Cable, select Component. Input Menu Computer 1 Input Menu icon Move the pointer (red arrow) to Computer 1 and press the SELECT button. Source Select Menu Move the pointer to Component or RGB (Scart) and press the SELECT button. RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 1/ COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart). Video Input ✔Note: • Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 58 for order. • Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is used as Monitor out. (p41) 33