Sanyo PLV Z1 Owners Manual - Page 24

Video Input Input Source Selection (Direct Operation) INPUT BUTTON WARNING TEMP. READY You can select Video input or Computer input with the INPUT buttonR.ELPALMAPCE (The input source that is selected last is selected when the projector is turned on.) If the projector cannot reproduce proper video source, select correct input source through menu operation on the next page. INPONU-OTFF buttoLnAMP Video Computer RGB Scart Input To select RGB Scart 21-pin video input through the computer input terminal, follow the procedures described at the section "Input Source Selection" on page 31. TOP CONTROL MENU SELECT INPUT REMOTE CONTROL INPUT IMAGE VIDEO IMAGE AUTO NO SHOW 1 VIDEO 2 INPUT button AUTO / VIDEO / S-VIDEO / COMPO BUTTON Press AUTO, VIDEO, S-VIDEO, or COMPO button on the remote control according to video input. *It is convenient for you to select the AUTO as the projector automatically detects incoming video signal, and adjust itself to optimize its performance. AUTO When selecting the AUTO, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO 3rd VIDEO The Y-Pb/Cb-Pr/Cr has priority over the S-VIDEO. The S-VIDEO has priority over the VIDEO. VIDEO When video input signal is connected to VIDEO, select the Video. S-VIDEO When video input signal is connected to S-VIDEO, select the S-Video. COMPO When video input signal is connected to Y-Pb/Cb-Pr/Cr, select the COMPO. REMOTE CONTROL INPUT IMAGE VIDEO IMAGE AUTO NO SHOW 1 VIDEO 2 KEYSTONE S-VIDEO 3 COMPONENT COMPO 4 AUTO / VIDEO / S-VIDEO / COMPO button 24