Sanyo PLV Z1 Owners Manual - Page 34

Computer Input Computer Adjustment (Auto) (Direct Operation) Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Press the AUTO PC ADJ. button on the remote control, and the function works. To store the adjustment data, follow the step 3 and 4 on page 35, 36. REMOTE CONTROL ON-OFF LIGHT AUTO PC ADJ. AUTO MENU SCREEN AUTO PC ADJ. button Computer Adjustment (Auto) (Menu Operation) 1 Press the MENU button, and the main menu appears. Select the Computer Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Computer Adjustment menu Computer Adjustment menu 2 Choose the Auto PC Adj., and then press the SELECT button to activate it. Selected Mode Auto PC Adj. adjusts Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Shows status (Stored/Free) of the selected mode. 3 To store the adjustment parameters by Auto PC Adjustment, follow the step 3 and 4 on page 35, 36. Once the parameters are memorized, the setting can be done just by selecting Mode in the Computer System Selection menu. NOTE The Fine sync, Total dots, Horizontal, and Vertical of some computers cannot be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 35-37.) The Auto PC Adjustment function cannot be operated when "720p (HDTV)," "1035i (HDTV)", or "1080i (HDTV)" is selected in the Computer System menu (p32). The Computer Adjustment menu cannot be operated when "RGB" is selected in the Computer System menu or "RGB (Scart)" is selected in the Source Selection menu. 34