Sanyo S1070 Instruction Manual, VPC-S1070 - Page 55

Auto LCD Off, Auto Power Off, Video Out, USB Mode, Up/Down

Page 55 highlights

English Auto LCD Off The Auto LCD Off setting allows you to adjust the length of time that the LCD screen will remain lit before turning off to save battery power. 3 options are available: • OFF (default) • 30 SEC • 1 MIN Auto Power Off The Auto Power Off setting allows you to adjust the length of time after which the camera will power down when inactive. Use the Up/Down navigation buttons to select from the menu options. 2 options are available: • 5 MIN (default) • 2 MIN Video Out The Video Out setting allows you to adjust the video output, depending on the type of your TV. Use the Up/Down navigation buttons to select from the menu options. 2 options are available: • NTSC (default) • PAL Camera Settings 41 OFF 30 SEC 1 MIN AUTO LCD OFF 5 MIN 2 MIN AUTO POWER OFF NTSC PAL VIDEO OUT USB Mode The USB Mode setting allows you to select the transfer method between your camera and your PC. 2 options are available: • PTP (PictBridge Print): When the camera is connected to a printer by a USB cable which supports Pictbridge, it can directly print images stored on the media. For details on PTP function, please See "PictBridge Print (PTP)" on page 44. PTP MSDC USB MODE • MSDC (default): The camera is set up to act as a mass storage device, allowing only for transfer of files between your camera and PC. The Setup Menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

Camera Settings
41
The Setup Menu
English
Auto LCD Off
The
Auto LCD Off
setting allows you to adjust the
length of time that the LCD screen will remain lit
before turning off to save battery power. 3 options
are available:
OFF (default)
30 SEC
1 MIN
Auto Power Off
The
Auto Power Off
setting allows you to adjust
the length of time after which the camera will power
down when inactive. Use the
Up/Down
navigation
buttons to select from the menu options. 2 options
are available:
5 MIN (default)
2 MIN
Video Out
The
Video Out
setting allows you to adjust the
video output, depending on the type of your TV.
Use the
Up/Down
navigation buttons to select
from the menu options. 2 options are available:
NTSC (default)
• PAL
USB Mode
The
USB Mode
setting allows you to select the
transfer method between your camera and your
PC. 2 options are available:
PTP (PictBridge Print): When the camera is
connected to a printer by a USB cable which
supports Pictbridge, it can directly print images
stored on the media. For details on PTP
function, please See “PictBridge Print (PTP)” on
page 44.
MSDC (default): The camera is set up to act as a mass storage device,
allowing only for transfer of files between your camera and PC.
AUTO LCD OFF
OFF
30 SEC
1 MIN
AUTO POWER OFF
5 MIN
2 MIN
VIDEO OUT
NTSC
PAL
USB MODE
PTP
MSDC