Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Macintosh
Sanyo WXU700 - WXGA LCD Projector Manual
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo WXU700 manual content summary:
- Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 1
This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 2
projector provides the wireless LAN module which complies with the module certification. Federal Communications Commission Notice This equipment has been tested the instructions, may Sanyo Responsible party : SANYO RF interference suppression. For Canadian Users This Class B digital apparatus - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 3
WLAN Module (1AV4U19B25500) je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Undertegnede SANYO FISHER Sales (Europe) GmbH, erklærer herved, at følgende udstyr WLAN [Danish] Module (1AV4U19B25500) overholder de væsentlige krav og øvrige relevante krav - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 4
from the actual operation depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software, please refer to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 5
instructions...4 Table of contents...5 Operating environment and configuration 7 Required operating environment for computers 7 Network specifications of the projector 8 Useful guide to the network screen............23 Network connection standby display...24 Network Capture 5 window...25 4. - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 6
Power control and status check...66 Controls...68 PC adjustment...72 Setting up the projector...73 Timer setting...76 Projector information...79 Multi-control...81 8. Network capture functions 87 About Network Capture function...88 Using the Real Time Capture...91 Error information...96 9. Appendix - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 7
Required operating environment for computers When operating the projector via the networks, computers should meet the operating environment below. OS CPU Memory Free HDD Space Screen Resolution Communication Protocol Network Correspond Wireless LAN Wired LAN Browser Application MAC - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 8
Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g, - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 9
Useful guide to the network function This manual describes the operation procedure of the projector's network menu and the provided application software for Macintosh users. Please refer to this manual depending on the situation. l How to project the computer screen's image via the network To - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 10
10 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 11
1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 11 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 12
Chapter 1 About LAN functions LAN functions and the features This product is loaded with a LAN network function which enables you to project an image on the computer through a projector via Network with dedicated software. With the software, you can also manipulate the projecting image and the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 13
example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 13 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 14
communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 14 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 15
via the LAN line. LAN connection modes Computer(1) Computer(2) Computer (3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control. To use the remote control, point to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 16
Chapter 1 About LAN functions 16 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 17
2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 17 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 18
be done with a browser later. First, complete the Wired or Wireless LAN connection between computers and projectors, then start browser configurations. ➔ "6. Basic setting and operation" (pp.45-64). STEP 3 Network Configuration has completed. Follow each chapter to project an image and operate the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 19
Installing the software Installing the software It is required to install the software into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer, logon as an administrator. Before installation, make sure that - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 20
Chapter 2 Setup procedures 4 Select a Destination, and Click Continue. 5 Click Install to perform a basic installation. 6 Click Close to complete the installation. 20 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 21
Installed software The following software is installed on your computer. Installing the software ● Network Capture 5: Captures the displayed image of the computer and serves it to the projector via the network. * Move to Trash to uninstall this software. 21 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 22
Chapter 2 Setup procedures 22 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 23
3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 23 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 24
and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby display screen will appear as below. While the "Please wait..." message is shown, some operations are invalid - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 25
IP address directly to specify the projector in another window. The registered multiple IP addresses can be searched at a time. e Network Projector List Display all the projectors connected to the networks. Show unoccupied projector as "On standby" and occupied projector as "Real time capturing" or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 26
the menu bar" (p.89). Using the multiple network adaptors When your computer provides multiple network adaptors, the network adaptor selecting window will appear each time the Network Capture 5 software starts. Select a network adaptor and check the "Set network adaptor as default" and then click OK - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 27
4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 27 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 28
sending or receiving the data. LINK lamp (Green) Light green when the projector is connected to the network. * When the LAN setting is "Off", the two lamps will not be on. Network environment settings Set the Wired LAN network through the projector menu. Detailed network settings will be made with - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 29
DHCP function On or Off. When you setup the network setting manually, select "Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set according to your network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 30
separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the following - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 31
is closed. 3. Click OK button on the "Search specified IP address" window, the registered multiple projectors will be searched. Then, the projector will be added on the Network Projector List of the application window. Network Projector list Specify IP button "Search specified IP address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 32
PIN code is to restrict the access from the networks to the projector. After setting the Network PIN code, you need to enter it to operate the projector via the networks. 1. Select "Network PIN code" in the Network menu, and press SELECT button. The Network PIN code screen will appear. 2. Set the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 33
Wired factory default Wired LAN factory default settings Select "Wired factory default" in the Network menu and press SELECT button. All the wired LAN settings will go back to the factory default settings. For details, refer to "Wired LAN factory default settings" (p.34). 33 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 34
Chapter 4 Wired LAN configurations Wired LAN factory default settings Parameter Wired 1 SELECTED LAN Wired 2 IP CONFIGURATION MANUAL DHCP Wired 3 MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 35
preparation for Wireless LAN setting with projectors and how to set the LAN environment. This projector contains the Wireless LAN module. The computer has to be equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g/n(Draft 2.0). If connecting in Infrastructure mode with an access - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 36
performing the steps in "6. Basic setting and operation." Setting procedures 1. Turn on the projector and select "Network" in the Input menu of the projector. 2. Select "LAN mode select" in the Network menu, and press Point 8 or SELECT button. 3. S elect similar LAN environment among Wireless - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 37
of WEP, WPA-PSK, WPA2-PSK security, select "Next". Refer to "Configuring security with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When its set On, IP address, Subnet, Gateway and DNS are - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 38
adjust setting; use the Point 7 8 buttons to move among the character positions of the key entry fields. This projector provides the following security options. Use optimum security option on your network environment. WEP64(40)bit Open WEP64(40)bit Share WEP128(104)bit Open WEP128(104)bit Share WPA - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 39
Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" security type. 2. Select "Key index". Use the press SELECT button to return to the Wireless setting screen. Select "Set" in the Wireless setting screen to complete the network setting. 39 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 40
digits Hex code.........64 digits * Security "WPA-PSK" and "WPA2-PSK" modes are not available when the "AdHoc" network type is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If any of the ASCII - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 41
" will appear. During the switching period, the projector cannot be operated. ("SIMPLE" LAN settings will be shown by pressing SELECT button. The settings cannot be changed.) 4. Activate "Network Capture 5" which is installed in the computer. 5. Authentication window will appear. Type your Name and - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 42
PIN code is to restrict the access from the networks to the projector. After setting the Network PIN code, you need to enter it to operate the projector via the networks. Select "Network PIN code" from the projector menu and press SELECT button. Set with the same procedures as setting Wired LAN - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 43
wireless communication is established with the access-point or computer in the network, the WIRELESS indicator on the front panel lights up. When sending or receiving of data, it blinks. Even though the wireless LAN in the network menu is selected, the WIRELESS indicator does not light, in this case, - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 44
Items Wireless 4 Selected LAN Wireless 5 Wireless Simple IP CONFIGURATION MANUAL DHCP MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 169. 255 255.255.255.255 255.255.255.255 WIRELESS CHANNEL 11 11 11 NETWORK TYPE WIRELESS SSID/ESSID (SSID/ESSID) WEP (WEP encryption) WPA-PSK (PSK - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 45
Describes basic operation and settings below by using the web browser. • Initial setting Setup the basic setting such as Projector name, Network PIN code, Time setting, etc. • Network setting Configure Wired/Wireless LAN environment. • E-mail Setting Configure E-mail function to manage the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 46
page, the authentication window will appear. In that case, type "user" onto the User Name text area and the login Network PIN code onto the Password text area and then click Log in button. * The entered User Name must be "user" and it can not be changed. [Note] When the projector is accessed for - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 47
. Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the (p.50) ✐T his Standard mode display is mainly used through this manual for the setting and control description. ✐If your computer does not have - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 48
Flash Player. (☞p.47) How to use the setting page To control and set up the projector, use the setting menus on the web browser. The basic operation and procedures commonly used on this manual are described below. Example of the Setting Page The setting pallet appears after clicking the item - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 49
Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 50
or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network PIN code to login the setting page (+p.32, p.42) PJLink - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 51
owner's manual for further details of the PJLink function. ✐ 1 to 32 alphanumeric characters can be used for the password. What's PJLink? The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 52
appears when time is set up correctly. Current time Indicates current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current time via the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 53
main menu. The following setting page is displayed. Set up the projector's network environment on this Setting sub menu. Setting of LAN 1. Select and Simple IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet mask............Sets Subnet mask. Default gateway - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 54
your DHCP server. When selecting "Manual", configure all the items manually. For further information, contact your network administrator. The address must be value. 4. To apply the setting, press Set button. The network of the projector starts re-booting and applies the setting. It takes about 20 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 55
Mode.........Select the Communication standard 802.11b or 802.11b/g/n Network Type..........Select either "Infrastructure" or "AdHoc". When selecting distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 56
Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security....Sets the type of encryption. Following types are available. WEP64(40)bit Open WEP64(40)bit Share WEP128(104)bit Open - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 57
alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail the DNS server and SMTP server cannot be used in your network environment. ✐ The projector does not send message to the address set in "Administrator address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 58
Corres. Value reaches [ ] hours. Attached message 58 ✐ " When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 59
Also see the owner's manual of the projector for further details. ● When internal PJ power circuit is failed: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 60
it with a new lamp immediately and reset the lamp counter. If the projector is used without resetting the lamp counter, the alert mail is sent to users in every power-on of the projector. This alert mail will not be sent when the mail sending condition "When the life span of lamp is reached" is - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 61
setting This product provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists item. PJ information Item Description Contact Enter user name of the projector etc. (optional) Place Enter place of the projector (optional) Community name(refer Enter community name - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 62
Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 addresses can be registered. ✐ Up to 10 trap addresses can be - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 63
is interrupted. o When Auto Play is failed. o When lamp Corres. Value reaches [ ] hours. ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 64
Chapter 6 Basic setting and operation 64 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 65
7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 65 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 66
Standby button on the page, the power of the projector can be controlled. Confirmation window as shown in the below appears when the Standby button is pressed. Item Description Popup confirmation window PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 67
control it through the network. To control the projector through the network, unlock the security on the projector using with the projector's menu control. Caution about turning on/off the projector via the networks When turning on/off the projector via the networks, preset the projector as follows - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 68
pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. Input Network : Network ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 69
Controls System This function is to select the system of signal input to the projector. The available system modes are listed on the pull-down menu button according to the input signal. Select a system and then click Set button. Available - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 70
Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 71
Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 71 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 72
PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 73
Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 74
Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes . Standby mode........Sets the network function enable or disable in the standby mode. Normal..... Enable Eco Disable Lamp control...........Selects the lamp control mode. Remote control - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 75
the time to indicate the filter warning message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time, Filter time, PIN code lock and Logo PIN code lock. No show Sets the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 76
not provide the built-in battery. The date and time information are lost when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.74)), or the network configuration is reset. The timer function is disabled until time is set up correctly. When using the NTP address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 77
from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Auto Changes lamp mode to "Auto" Lamp High Changes lamp mode to "High" Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 78
secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6). Invalid event Projector Power OFF ON OFF ON Invalid event OFF Event 1 Event 2 Event 3 Event 4 Event - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 79
the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 80
with X Red/Red with X Lamp failure (Lamp failure, check the lamp condition) Lamp failure (Lamp failure and lamp is being used over a specified use time, replace the lamp immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 81
can control and set up them together. Click Multi Control on the main menu to display the control page. Note: To control the multiple projectors, each projector must be set the same Network PIN code. Example of multi control PJ1 PJ2 PJ3 PJ4 PC6 PC5 PC4 Select Input2 for PJ1 to PJ4. 81 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 82
Start/stop the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF...........Stops multi control function ON Starts multi control function. The multi - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 83
used. * When you click on a listed IP address, the login page for the selected projector will be displayed with a new window. IP address Status Memo Page no. Click here to close the sub menu Check & Change. ✐ 1 0 projectors can be registered per page and up to 100 sets can be registered for - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 84
for status indications. Status Status Description (blank The projector is connected to the network correctly No connect The projector may not be connected to the network. Please check the connection and network configuration of this projector. PIN code error The PIN code is incorrect. The - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 85
setting and adjust controls of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 86
Chapter 7 Controlling the projector 86 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 87
8 Chapter 8. Network capture functions Network Capture is a function to display the screen image of the computer via the network. - Real Time Capture 87 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 88
Start up the Network Capture 5 To start up the Network Capture 5, click "Network Capture 5" from "Macintosh HD" - "Application" - "Network Capture 5" menu. The application window will appear and search the projectors in the network and list them on the projector list. If any projector is not listed - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 89
the operating modes as shown in the table below. Network Capture activating Parameter set up... Window show.. Version information.. Shut down Menu during Real and projector. For further information, see item "Parameter set up" on the next page. Window show Displays the application window on - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 90
and projects the computer's captured image on the screen automatically when the network capture is executed while the projector is in the standby. q Select capturing object Check if you want to select an individual window on the computer screen. This is useful function when you open the multiple - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 91
speed of the captured image using the Real Time Capture function is depending on the network environment and data volume of the image. It cannot be supported for movie pictures. ✐ The projector can not reproduce the sound during the real time capturing. ✐ "Spinning wait cursor " cannot be - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 92
PC6 * Start capturing from the PC1. Select input mode to "Network" previously. 1 Start up Network Capture 5. 2 Select the projector(s) listed on the projector list on the application window and click Start real time capture. The application window will disappear and then the screen image of the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 93
image of PC1 with PJ2. PC6 * Star t capturing of the PC1 from the PC5. Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the setting page. 2 Select the computer number from the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 94
PC3 PC4 Capture PC5 * Star t captur ing of the PC1 from the projector PJ2. PJ2 PC6 Project a screen image of PC1 with PJ2. Select "Network" in the Input menu previously. 1 Select "Network capture" in the Network menu. Press Point 8 or SELECT button. 2 Select "PC number" and press SELECT - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 95
"Parameter set up" (+ p.90). ✐ When your computer provides multiple network adaptors, and "Select normal network adaptor" on the parameter setup window is un-checked, the network adaptor selecting window (+ p.24) will appear. ✐ When plural projectors are found, the real-time capture will not start - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 96
instructions of the wireless mouse, please refer to the projector's owners manual. ✐ O n the projected screen using with the network capture network cable. When the parameter is set, the reserved port number is specified. ➔ Check the parameter setting (+p.90) ✐ The Capture transfer is Windows - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 97
9 Chapter 9. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 97 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 98
> open_172.21.99.251_10000 [return] *U se the IP address assigned to the projector 4. When communication is established correctly, the word "PASSWORD:" appears on the window. Type the login password (Network PIN code*2) for the projector and then press "Enter" key on the keyboard. If you do not - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 99
The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another instructions about the telnet application, please see the on-line guide on your computer. *2 The password is a Network PIN code decided item "Network - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 100
In(Shockwave Flash) is installed and set up correctly. Please see further instructions on the next page and it is depending on the web browser. correctly. Especially when connecting the projector and computer with a UTP cross cable directly, or when the network does not provide the proxy server - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 101
Examples: OS/Browsers MAC OS X v 10.4 Web browser setting Safari JavaScript and Flash Player enable setting Select Preferences... from Safari on the web browser and then select Security tab and check Enable plug-ins (for flash player) and Enable JavaScript. 101 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 102
port correctly in Web Proxy Server window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the items Web Proxy (HTTP) and Secure Web Proxy (HTTPS) of Select a proxy server to configure. If you connect the projector to the computer directly with UTP - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 103
OS X v 10.4 When you use Macintosh OS X v 10.4 and Network Capture 5, you can cancel the firewall blocking following to the steps below; 1 Open System Preferences from Apple menu, click Sharing icon. The Sharing setting window will appear. 2 Select Firewall tab and click "New...", then a dialog - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 104
Preference from Apple menu, click Security icon. A security setting window appears. 2 Select Firewall tab, check Limit incoming connections to specific services and applications, and then click "+". A finder menu appears. 3 Select Network Capture 5 and click add button. The application name will - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 105
If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described. ■ The computer cannot connect projectors. Wired LAN Is the LAN cable connected to the projector properly? Is the LINK/ACT lamp of the LAN terminal - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 106
access points may have the DHCP function. For detail of the settings, refer to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from the computer? Specify IP Address directly on the optional setting. Refer - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 107
. If the computer using the same channel as yours is existing closely, the networking speed may be reduced or the communication unstable. Change the channel to resolve the problem. The channels of the projector and projector Client computer must be the same. Or adjust the Quality selection in the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 108
exists equipment with DHCP server functions (such as a server and a router) on the network, the DHCP server function may be automatically operating. Ask your system administrator whether the DHCP server is operating. ESSID (Extended Service Set Identifier) ESSID is the ID that is set to computers on - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 109
. The last 3 bytes are controlled and assigned by the manufacturers of network interface (no duplication of MAC address). Therefore, MAC address is a (formerly WECA). The products that passed the Wi-Fi Alliance interoperability test are given the certification of 'Wi-Fi certified' and permitted to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 110
SO-MAC-KY7AC NETWORK OWNER'S MANUAL FOR MACINTOSH SANYO Electric Co., Ltd.
Network Set-up and Operation
For Macintosh
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.