Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 70
Image, adjustment, Input source
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button. Item Description Contrast Adjusts picture contrast Brightness Adjusts picture brightness Color Adjusts picture color saturation Tint Adjusts picture hue Item Description Color temp Sets a color temperature mode. White balance Red, Green, Blue Adjusts each white balance respectively. Sharpness Adjusts picture sharpness. * When the value of the white balance is changed, the color temp. indicates "Adj." Item Description Gamma Adjusts brightness of darker part of the picture. Noise reduction........S witches noise reduction mode Progressive S witches progressive mode Reset Resets the Image adjustment to previous levels. Store Stores the Image adjustment values. Select an item [Image 1 - Image 4] from the pull-down menu and click Store button. Load Loads the Image mode. Select an image mode from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in the table left. Input source Image mode Video Computer Dynamic 4 Standard 4 Real * Cinema 4 Blackboard(Green) 4 Colorboard 4 Image 1 - 4 4 70 4 4 4 * 4 ✐ The mark "4" indicates the available image mode in the selected input 4 source. The error message appears when the disabled image mode 4 indicated with "*" is selected.