Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Macintosh - Page 89

About Network Capture function Commands on the menu bar When the Network Capture 5 icon on the menu bar is clicked, the popup menu will appear. It provides according to the operating modes as shown in the table below. Network Capture activating Parameter set up... Window show.. Version information.. Shut down Menu during Real time capturing One-shot executing Start real time capture One-shot capture Terminate capture Window show.. Version information.. Shut down Real time capture executing One-shot capture Terminate capture Window show.. Version information.. Shut down Items Description Start real time / Terminate capture...... Starts / Terminates the real time capturing. (+p.91) The screen image of the computer is projected on the screen in real time. One-shot capture Transfers the one-shot screen image of the computer. Select capture object Sets to display the capture window selection dialog. * This menu will appear when "Select capturing object" is checked on the parameter setting. (p.90) Parameter set up Sets the communication parameter between the computer and projector. For further information, see item "Parameter set up" on the next page. Window show Displays the application window on the screen. Version information Displays the version of this software. Shut down Quits the Network Capture 5 application. 89