Schwinn 245 Recumbent Bike Assembly and Owner's Manual - Page 6

HARDWARE / before assembly A B C D E F G H I J K L M Item Qty Description A 1 Carriage Bolt, M8x85 B 1 Hex Bolt, M8x85 C 1 Console Tilt Adjustment Knob D 8 Button Head Hex Screw, M8x16 E 1 Lock Nut, M8 F 4 Hex Screw, M8x16 G 14 Flat Washer, M8 Item Qty Description H 1 Hex Bolt, M7x30 I 4 Curved Washer, M8 J 4 Cover K 8 Button Head Hex Screw, M8x45 L 1 Lock Washer, M7 M 1 Flat Washer, M7 Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 111" x 73" (2.8m x 1.9m). Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock- wise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly requires 2 people. 6