Schwinn 570T Treadmill Assembly and Owner s Manual - Page 37

Changing Incline Levels, Changing Speed Levels

Get Schwinn 570T Treadmill PDF manuals and user guides View all Schwinn 570T Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

The default is "VALUE - ON" for all workout values. When done with modifying which workout values are displayed, push the OK button to set the Console. 10. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference. The Console Display shows the current value setting: "ON" or "OFF". Push the Increase() or Decrease() buttons to change the value. The default is "ON". Push the OK button to set the Telemetry Heart Rate Receiver to active. 11. The Console will go to the Power-Up Mode screen with the user selected. Reset a User Profile 1. From the Power-Up Mode screen, push the User button to select one of the User Profiles. 2. Push the OK button to select the User Profile. 3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt. Note: To exit the User Profile options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode screen. 4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile option. 5. The Console will now confirm the request to reset the User profile (the default selection is 'RESET - NO'). Push the Increase() or Decrease() buttons to adjust the selection. 6. Push OK to make your selection. 7. The Console will go to the Power-Up Mode screen. Pre-Set Incline Buttons INCLINE 0-15% 15 13 Fitness Score www.schwinnconnect.com 10 8 5 2 Changing Incline Levels Incline Push the Incline Level Increase() or Decrease() buttons to change the incline angle Enter 0 of the Deck at any time with the Safety Key installed. To rapidly change the incline level Button push the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will adjust to the selected incline level. Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be pushed within 12 seconds. INCLINE Be sure the area below the machine is clear before lowering the Deck. Fully lower the Deck after each workout. Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in belt speed and incline angle of deck can occur during workouts, and be attentive in order to avoid loss of balance and possible injury. Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum height of the fully inclined Deck. Changing Speed Levels Push the Speed Level Increase() or Decrease() buttons to change the Belt Speed at any time in a workout program. To rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking Belt will adjust to the desired speed. Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
37
The default is “VALUE - ON” for all workout values. When done with modifying which workout values are displayed,
push the OK button to set the Console.
10.
The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings
and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option
allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.
The Console Display shows the current value setting: “ON” or “OFF”. Push the Increase(
) or Decrease(
) buttons to
change the value. The default is “ON”.
Push the OK button to set the Telemetry Heart Rate Receiver to active.
11.
The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1.
From the Power-Up Mode screen, push t
he User button to select one of the User Profiles.
2.
Push the OK button to select the User Profile.
3.
The Console display shows the GOAL TRACK prompt. Push the Decrease (
) button to change the prompt.
Note:
To exit the User Profile options, push the PAUSE/STOP button and the
console will go back to the Power-Up Mode screen.
4.
The Console display shows the RESET prompt and the current User Profile name.
Push OK to start the Reset User
Profile option.
5.
The Console will now confirm the request to reset the User profile (the default
selection is ‘RESET - NO’). Push the Increase(
) or Decrease(
) buttons to adjust
the selection.
6.
Push OK to make your selection.
7.
The Console will go to the Power-Up Mode screen.
Changing Incline Levels
Push the Incline Level Increase(
) or Decrease(
) buttons to change the incline angle
of the Deck at any time with the Safety Key installed. To rapidly change the incline level
push the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will
adjust to the selected incline level.
Note:
After a Pre-Set Incline Button is pushed, the Incline Enter Button must be
pushed within 12 seconds.
Be sure the area below the machine is clear before lowering the Deck. Fully lower the Deck after each
workout.
Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in belt
speed and incline angle of deck can occur during workouts, and be attentive in order to avoid loss of
balance and possible injury.
Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height
of the user and the maximum height of the fully inclined Deck.
Changing Speed Levels
Push the Speed Level Increase(
) or Decrease(
) buttons to change the Belt Speed at any time in a workout program.
To rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking
Belt will adjust to the desired speed.
Note:
After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.
INCLINE
0-15
%
15
13
10
8
5
2
0
www.sc
Fitn
Pre-Set Incline
Buttons
Incline
Enter
Button