Schwinn 570T Treadmill Assembly and Owner s Manual - Page 8

SPECIFICATIONS 89.4 cm ( 35.2" ) 146.3 cm ( 57.6" ) 196 cm ( 77.2" ) 165.9 cm ( 65.3") Maximum User Weight: 136 kg (300 lbs) Maximum Inclined Deck Height: Assembled Weight: 43.7 cm ( 17.2 inches ) 97.5 kgs (approx. 215 lbs) Total Surface Area (footprint) of equipment: 17522.4 cm2 Power Requirements: Operational Voltage: Operating Current: Heart Rate Chest Strap: 220V - 240V AC, 50Hz 8 A 1 CR2032 battery Sound Emission: Less than 70 db average without load. Noise emission under load is higher than without load. Complies with the following: ISO 20957 Compliant SAA Compliant Connectivity: 89.4 cm ( 35.2" ) 125.2 cm ( 49.3" ) DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the prescribed methods at an approved waste center. Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 211.3 cm x 396.7 cm ( 83.2" x 156.2" ). Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of the machine. 3.97m ( 156.2" ) Basic Assembly Tips Follow these basic points when you assemble your machine: 0.6m ( 24" ) • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. 2.11m ( 83.2" ) • Using the recommended wrenches, turn 2m ( 79" ) the bolts and nuts to the right (clock- wise) to tighten, and the left (counter- clockwise) to loosen, unless instructed otherwise. 0.6m ( 24" ) • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly can require 2 people. 8