Sennheiser XSW-D LAVALIER SET Instruction manual - XS Wireless Digital PDF
Sennheiser XSW-D LAVALIER SET Manual
View all Sennheiser XSW-D LAVALIER SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser XSW-D LAVALIER SET manual content summary:
- Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 1
XS Wireless Digital Instruction Manual Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com XS Wireless Digital - v2.1 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 2
► XLR BASE SET ► LAVALIER SET ► PRESENTATION BASE SET ► XLR BASE SET ► INSTRUMENT BASE SET ► PEDALBOARD SET - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 3
► PORTABLE INTERVIEW SET ► PORTABLE LAVALIER SET ► PORTABLE ENG SET ► PORTABLE BASE SET - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 4
VOCAL SET Package contents ► ► Package contents Additional information 1 Microphone clamp for fastening the vocal microphone to a stand 2 XSW Digital TX XLR: transmitter (female XLR socket) for connecting to the vocal microphone ► 3 XSW Digital RX XLR: receiver (male XLR plug) for connecting to a - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 5
Operation Connecting the transmitter to the vocal microphone ► Operation ▷ Plug the transmitter into the XLR socket on the vocal microphone. Connecting the receiver to a mixing console ▷ Plug the receiver into the XLR input of a channel on your mixing con- sole. 4 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 6
Holding the vocal microphone ► Operation ▷ Grip the vocal microphone only by the handle. ▷ You can also use the microphone clamp to fasten the vocal microphone to a stand. ▷ Hold the microphone 5 to 10 cm in front of your mouth when singing. ▷ Do not grab the transmitter. The range may decrease if - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 7
LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green on the receiver until the status LEDs switch off. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 8
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 9
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 10
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 9 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 11
LAVALIER SET Package contents ► Package contents Additional information 1 Belt clip for the transmitter 2 XSW Digital TX 35: transmitter (3.5 mm jack socket) for connecting to the clip-on microphone ► 3 XSW Digital RX XLR: receiver (male XLR plug) for connecting to a mixing console ► 4 Charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 12
Operation Connecting the clip-on microphone to the transmitter ► Operation ▷ Plug the clip-on microphone's screw-on jack plug into the jack socket on the transmitter. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 13
rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 14
Operation Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 15
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 16
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 17
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 16 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 18
Package contents PRESENTATION BASE SET Package contents ► Additional information 1 Belt clip for the transmitter 2 XSW Digital TX 35: transmitter (3.5 mm jack socket) for connecting to a microphone with a jack plug (3.5 mm) ► 3 XSW Digital RX XLR: receiver (male XLR plug) for connecting to a mixing - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 19
rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 20
Operation ▷ Press the button on the transmitter and the button on the receiver until the status LEDs switch off. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 21
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 22
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 23
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 22 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 24
XLR BASE SET Package contents ► Package contents Additional information 1 XSW Digital TX XLR: transmitter (female XLR socket) for connecting to a microphone with an XLR plug (male) ► 2 XSW Digital RX XLR: receiver (male XLR plug) for connecting to a mixing console ► 3 Charging cable (USB-A to USB - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 25
Operation Connecting the transmitter to the microphone ► Operation ▷ Plug the transmitter into the XLR socket on your microphone. Connecting the receiver to a mixing console ▷ Plug the receiver into the XLR input of a channel on your mixing con- sole. 24 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 26
have to charge the rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. 25 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 27
receiver ► ▷ Press the button on the transmitter and the button on the receiver until the status LEDs switch off. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 28
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 29
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 30
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 29 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 31
INSTRUMENT BASE SET Package contents ► Package contents Additional information 1 Belt clip for the transmitter 2 XSW Digital TX 63: transmitter (6.3 mm jack plug) for connecting to an instrument with a jack socket (6.3 mm) or to the extension cable ► 3 XSW Digital RX 63: receiver (6.3 mm jack plug - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 32
Operation Operation Connecting the transmitter to an instrument You can connect the transmitter either directly to your instrument or using the extension cable and the belt clip. ► Direct connection ▷ Plug the transmitter into the jack socket on your instrument. ▷ Align the transmitter so that you - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 33
rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 34
Operation Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 35
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 36
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 37
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 36 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 38
PEDALBOARD SET Package contents ► ► Package contents Additional information 1 Belt clip for the transmitter 2 XSW Digital TX 63: transmitter (6.3 mm jack plug) for connecting to an instrument with a jack socket (6.3 mm) or to the extension cable ► 3 XSW Digital RX Pedal: receiver with built-in - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 39
Operation Operation Connecting the transmitter to an instrument You can connect the transmitter either directly to your instrument or using the extension cable and the belt clip. ► Direct connection ▷ Plug the transmitter into the jack socket on your instrument. ▷ Align the transmitter so that you - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 40
bottom of the receiver (M5 × 10). A drill template is included. If using multiple effects devices on your Pedalboard, the receiver must always be the first device in the series, since it is a wireless receiver and therefore does not have an input socket for connecting it with a cable. Connecting the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 41
or power the receiver via the USB port. Battery operation is not possible. The status LED starts flashing green. The flashing indicates that a wireless connection is being established. Switching on the transmitter: ► ▷ Briefly press the button on the transmitter. The status LED indicates the charge - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 42
Switching off the transmitter and receiver Switching off the receiver: ► Operation ▷ Disconnect the receiver from the power supply system. Switching off the transmitter: ► ▷ Press the button on the transmitter until the status LED switches off. 41 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 43
Operation Muting the audio signal and activating the tuning device When using a set, you can mute the audio signal. The tuning device is activated while the audio signal is muted. ► ▷ To mute the audio signal: Briefly press the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 44
Operation Checking the charge level during use The status LED remains green during use as long as the transmitter's rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15 %. Once the charge level falls below 5 %, - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 45
Operation Charging the rechargeable battery To minimize charging time and allow you to monitor the charge level, you should switch off the transmitter before charging the battery. However, the transmitter can also be charged while in operation. ► ▷ Use the charging cable to connect the USB port on - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 46
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 45 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 47
Package contents PORTABLE INTERVIEW SET Package contents ► Additional information 1 Hot shoe adapter for the receiver 2 XSW Digital TX XLR: transmitter (female XLR socket) for connecting to a microphone with an XLR socket ► 3 XSW Digital RX 35: receiver (3.5 mm jack socket) for connecting to the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 48
Operation Connecting the transmitter to the microphone ► Operation ▷ Plug the transmitter into the XLR socket on your microphone. Connecting the receiver to the camera ► ▷ Plug the camera cable's screw-on jack plug into the jack socket on the receiver. ▷ Lock the jack plug by screwing down the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 49
have to charge the rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. 48 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 50
it on, you have to adjust the input level on the camera. ► ▷ If the camera has automatic gain control (AGC), you should disable this function. ▷ Set the input level in the camera's menu so that the audio signal does not overload the input. ▷ During recording, regularly check the input level on - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 51
Operation Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 52
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 53
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 54
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 53 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 55
Package contents PORTABLE LAVALIER SET Package contents ► Additional information 1 Belt clip for the transmitter 2 Hot shoe adapter for the receiver 3 XSW Digital TX 35: transmitter (3.5 mm jack socket) for connecting to the clip-on microphone ► 4 XSW Digital RX 35: receiver (3.5 mm jack socket) for - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 56
Operation Connecting the clip-on microphone to the transmitter ► Operation ▷ Plug the clip-on microphone's screw-on jack plug into the jack socket on the transmitter. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 57
Connecting the receiver to the camera ► Operation ▷ Plug the camera cable's screw-on jack plug into the jack socket on the receiver. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the audio signal. ▷ Insert the receiver - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 58
LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green If the camera has automatic gain control (AGC), you should disable this function. ▷ Set the input level in the camera's menu so that the audio signal does not overload - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 59
Operation Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 60
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 61
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 62
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 61 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 63
PORTABLE ENG SET Package contents ► Package contents Additional information 1 Belt clip for the transmitter 2 Hot shoe adapter for the receiver 3 XSW Digital TX XLR: transmitter (female XLR socket) for connecting to a microphone ► 4 XSW Digital TX 35: transmitter (3.5 mm jack socket) for - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 64
Operation 5 XSW Digital RX 35: receiver (3.5 mm jack socket) for connecting to the camera cable ► 6 Charging cable (USB-A to USB-C) for charging the transmitter and receiver 7 ME 2-2: - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 65
Connecting the clip-on microphone to the transmitter ► Operation ▷ Plug the clip-on microphone's screw-on jack plug into the jack socket on the transmitter. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the audio - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 66
Connecting the receiver to the camera ► Operation ▷ Plug the camera cable's screw-on jack plug into the jack socket on the receiver. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the audio signal. ▷ Insert the receiver - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 67
rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 68
the camera has automatic gain control (AGC), you should disable this function. ▷ Set the input level in the camera's menu so that the audio signal does not the audio signal is not overloading. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 69
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 70
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 71
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 70 - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 72
PORTABLE BASE SET Package contents ► Package contents Additional information 1 Belt clip for the transmitter 2 Hot shoe adapter for the receiver 3 XSW Digital TX 35: transmitter (3.5 mm jack socket) for connecting to a microphone with a jack plug (3.5 mm) ► 4 XSW Digital RX 35: receiver (3.5 mm - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 73
Operation Connecting the microphone to the transmitter ► Operation ► ▷ Plug your microphone's jack plug into the jack socket on the transmitter. ▷ Insert the transmitter into the belt clip. ▷ Fasten the belt clip to your clothes, for example on your belt or waist- band. Connecting the receiver to - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 74
rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 75
the camera has automatic gain control (AGC), you should disable this function. ▷ Set the input level in the camera's menu so that the audio signal does not the audio signal is not overloading. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 76
Operation Checking the charge level during use The status LED remains green during use as long as the rechargeable battery has sufficient charge. The status LED begins flashing red and green in alternation when the charge level falls below 15%. Once the charge level falls below 5%, the status LED - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 77
Operation Charging the rechargeable battery To minimize charging time and monitor the charging status the transmitter or receiver should be switched off before you charge the battery. However the transmitter or receiver can be charged while in operation. ► ▷ Plug the small end of the USB charging - Sennheiser XSW-D LAVALIER SET | Instruction manual - XS Wireless Digital PDF - Page 78
The transmitter and the receiver of a set are pre-paired at the factory and therefore ready for immediate use. The wireless connection is established once the transmitter and . ▷ If this does not correct the fault, please contact Sennheiser customer service: www.sennheiser.com/service-support 77
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
XS Wireless Digital - v2.1
Instruction Manual
XS Wireless Digital