Sennheiser XSW-D LAVALIER SET Instruction manual - XS Wireless Digital PDF - Page 57
Briefly press the button on the transmitter and the button on the receiv
View all Sennheiser XSW-D LAVALIER SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Connecting the receiver to the camera ► Operation ▷ Plug the camera cable's screw-on jack plug into the jack socket on the receiver. ▷ Lock the jack plug by screwing down the coupling ring. If the jack plug is not firmly locked, crackling noise can appear in the audio signal. ▷ Insert the receiver into the hot shoe adapter. ▷ Slide the hot shoe adapter onto your camera. ▷ Plug the camera cable's simple jack plug into the jack socket on your camera. Switching on the transmitter and receiver ► ▷ Briefly press the button on the transmitter and the button on the receiver. The status LEDs indicate the charge level for four seconds. ▷ During these four seconds, check that the transmitter and receiver are sufficiently charged. > 75% 5% - 75% < 5% If the status LED remains red, you should charge the rechargeable bat56