Sennheiser XSW-D LAVALIER SET Instruction manual - XS Wireless Digital PDF - Page 50
Set the input level in the camera's menu so that the audio signal does
View all Sennheiser XSW-D LAVALIER SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Operation The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do not remain green, either the charge level is below 15% (see „Checking the charge level during use") or the transmitter and receiver are not paired (see „Pairing"). Switching off the transmitter and receiver ► ▷ Press the button on the transmitter and the button on the receiver until the status LEDs switch off. Adjusting the input level on the camera Once you have connected the receiver to the camera and switched it on, you have to adjust the input level on the camera. ► ▷ If the camera has automatic gain control (AGC), you should disable this function. ▷ Set the input level in the camera's menu so that the audio signal does not overload the input. ▷ During recording, regularly check the input level on the camera to make sure that the audio signal is not overloading. 49