Sennheiser XSW-D LAVALIER SET Instruction manual - XS Wireless Digital PDF - Page 49
The status LEDs indicate the charge level for four seconds.
View all Sennheiser XSW-D LAVALIER SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Holding the microphone ► Operation ▷ Grip the microphone only by the handle. ▷ Hold the microphone 5 to 10 cm in front of your mouth. ▷ Do not grab the transmitter. The range may decrease if the transmitter is covered. ▷ Do not touch the microphone basket. The sound may be distorted if the microphone basket is covered. Switching on the transmitter and receiver ► ▷ Briefly press the button on the transmitter and the button on the receiver. The status LEDs indicate the charge level for four seconds. ▷ During these four seconds, check that the transmitter and receiver are sufficiently charged. > 75% 5% - 75% < 5% If the status LED remains red, you should charge the rechargeable battery first. If the status LED flashes red, the charge level is too low. You have to charge the rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. 48