Sennheiser XSW-D LAVALIER SET Instruction manual - XS Wireless Digital PDF - Page 7
be unmuted.
View all Sennheiser XSW-D LAVALIER SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Operation After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do not remain green, either the charge level is below 15% (see „Checking the charge level during use") or the transmitter and receiver are not paired (see „Pairing"). Switching off the transmitter and receiver ► ▷ Press the button on the transmitter and the button on the receiver until the status LEDs switch off. Muting the audio signal When using a set, you can mute the audio signal. The audio signal can then be unmuted. ► ▷ To mute the audio signal: Briefly press the button on the transmitter or receiver. ► ▷ To unmute the audio signal: Briefly press the button on the transmitter or receiver. 6