Sharp 32C540 32C540 Operation Manual - Page 41

Using the Audio Output Terminals • These terminals are used for connecting an external audio amplifier. The STEREO/MONO/ SAP, VOLUME, MUTE and FAO functions can all be controlled via the television's remote control or directly on theTV itself.These terminals relay the audio signal of all programs being displayed on the TV screen. (AUDIO OUTPUT terminals are located on the rear of the cabinet.) CONNECTIONS (Rear connection terminals of TV) To the audio input terminals Stereo Amplifier Speaker System (1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level. (2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV. (3) Turn the TV set and stereo amplifier on. (4) If you desire, you can turn off the sound of the TV's internal speakers by accessing the TV's AUDIO SELECT screen. See page 13. (5) Adjust the volume control on the stereo amplifier to a moderate listening level. (6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME, MUTE and FAO), from either the remote control, or directly from the TV set. Note: • For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used. • When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adaptor as shown below. • When FAO is set to "OFF", we recommend you to keep the TV's audio output level high for optimal sound quality. (see page 13.) To the TV Plug adapter To the equipment being connected Pin plug x 2 Pin Plug Pin jack/Mini plug 41 32C540 41