Sharp DX-C400FX DX-C310 DX-C3400 Operation Manual - Page 206
STORING COPY OPERATIONS Job Programs
View all Sharp DX-C400FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
COPIER STORING COPY OPERATIONS (Job Programs) A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation. For example, suppose 8-1/2" x 11" (A4) size CAD drawings are copied once a month for archive purposes using the following settings: 8-1/2" x 11" (A4) size CAD drawings (1) The 8-1/2" x 11" (A4) size CAD drawings are reduced to 5-1/2" x 8-1/2" (A5) size. Copies (2) The drawings have fine lines that do not show clearly, and thus a dark exposure setting (level 4) is used. (3) To reduce paper use by half, 2-sided copying is used. When a job program is not stored Set 8-1/2" x 11" (A4) to 5-1/2" x 8-1/2" (A5) reduction Change the exposure setting Select 2-sided copying Press the [COLOR START] key or the [BLACK & WHITE START] key. When a job program is stored Press the [#/P] key. Select the [Recall] key and press the [OK] key Select the stored program key and press the [OK] key. Considerable time is required to copy the drawings each month because the above settings must be selected. In addition, mistakes are occasionally made when selecting the settings, so some copies must be redone. Press the [COLOR START] key or the [BLACK & WHITE START] key. The settings are stored in a job program, so they can be selected by selecting a key. This is simple and takes no time. In addition, the settings are all stored so there are no chances for mistakes, and thus no need to redo copies due to setting mistakes. • Up to 48 job programs can be stored. The job programs are retained even if an interruption occurs in the power supply. • Job programs can also be stored in the Web pages. Click [Job program] and then [Copy] in the Web page menu to store a job program. 2-106 Contents