Sharp DX-C400FX DX-C310 DX-C3400 Operation Manual - Page 96

BEFORE USING THE MACHINE SHARP OSA Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the keys that are displayed on the operation panel and functions such as scan send can be linked to an external application. There are two types of external applications: "standard application" and "external account application". An "external account application" is used for centralized account management of a multifunction machine on a network. A "standard application" refers to all other applications. APPLICATION COMMUNICATION MODULE (MX-AMX2) The application communication module is required to use a "standard application" on the machine. When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves the operation screen from the registered URL. Control of the operation screen is performed by the standard application, and Scan to FTP, Scan to Network Folder, and HTTPS transmission can be executed. Standard application setup To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard application in the screen that appears. Selecting a standard application The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained below. Keys in the display can be selected with the arrow keys and the [OK] key. IMAGE SEND LINE DATA Press the Sharp OSA shortcut key. 1 COPY SYSTEM JOB STATUS SETTINGS BACK OK Select the [Sharp OSA] key. When no standard applications are stored in the Web page, the [Sharp OSA] key does not appear. 2 1-58 Contents