Sharp DX-C400FX DX-C310 DX-C3400 Operation Manual - Page 81

BEFORE USING THE MACHINE Types of paper that can be used in each tray The following types of paper can be loaded in each tray. "-" in the table indicates "cannot be used". Plain paper Tray 1/Tray 2/Tray 3/Tray 4 Permitted Bypass tray Permitted Pre-printed Permitted Permitted Recycle Paper Permitted Permitted Letter head Pre-punched Permitted Permitted Permitted Permitted Color Heavy paper*1 Permitted - Permitted Permitted Labels - Glossy paper*2 - Transparency film - Permitted Permitted Permitted Envelopes - Permitted Thin paper*3 - Permitted *1 "Heavy paper" is heavy paper up to 110 lbs. index (209 g/m2). Printer drivers that allow the use of glossy paper are PCL6, PCL5-c, and PS printer drivers in a Windows environment. *3 Thin paper from 15 lbs. to 16 lbs. (55 g/m2 to 59 g/m2) can be used. Print side face up or face down Paper is loaded with the print side face up or face down depending on the paper type and tray. The loading orientation of punched paper, letterhead paper, and pre-printed paper differs from that of other paper. For details, see "Example: Placement orientations of punched paper, letter head paper, and pre-printed paper" (page 1-44). Trays 1 to 4 Load the paper with the print side face up. However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face down*. Bypass tray Load the paper with the print side face down. However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face up*. * If "Disabling of Duplex" (Web page only) is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 4; face down in the bypass tray). 1-43 Contents