Sharp DX-C400FX DX-C310 DX-C3400 Operation Manual - Page 330

FACSIMILE USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE When sending a fax from the document glass in direct transmission mode, only one page can be transmitted. Keys in the display can be selected with the arrow keys and the [OK] key. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark 5-1/2" x 8-1/2" 1 (A5) B5 8-1/2" x 11" (A4) • Align the middle of the original with the tip of the mark at the middle of the scale on the left side of the document glass. • Place the original in the appropriate position for its size as shown above. • When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-50) Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. (3) (2) AAA AAA CCC CCC EEE EEE GGG GGG 2 III III BBB BBB DDD DDD FFF FFF HHH HHH JJJ JJJ BACK OK Enter the destination fax number. (1) Select the [Address] key in the base screen. For the [Address] key, see "BASE SCREEN OF FAX MODE" (page 4-8). (2) Select the one-touch key of the desired destination. (3) Select the [Basic Menu] key. • Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot be used. • In addition to specification by one-touch key, a destination can also be specified using a search number. You can also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more information, see "ENTERING DESTINATIONS" (page 4-19). 4-37 Contents