Sharp DX-C400FX DX-C310 DX-C3400 Operation Manual - Page 454

SCANNER/INTERNET FAX TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). When a default address is configured in "Default Address Setting" (Web page only) in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the mode or recipient, select the [Cancel] key in the display, press the [OK] key, and then follow the procedure below. Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. • When placing the originals, orient them as shown below. Originals Document feeder tray Place the original face up. Document glass Place the original face down with the middle aligned with the tip of the mark at the middle of the scale on the left side of the document glass. 1 Portrait orientation* 1 1 1 Landscape orientation 1 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 3. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 5-32 Contents