Sharp LC-20SH7U LC-20SH7U Operation Manual - Page 16

INITIAL SETTING Note: • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [MENU] during auto channel scan, the setting will be canceled. • When no channel can be received by auto channel scan, "NO TV SIGNALS" will be displayed on the TV screen. • Channel settings will be saved even if the power fails. • If you have Spanish or French menus and need English, press [MENU]. Use [Cursor K/L] to select "IDIOMA" or "LANGAGE". Press [ENTER] to select "ENGLISH". Press [MENU] to remove the main menu. • With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost. 5 Language Selection You can choose English, Spanish, or French as your on-screen language. 1 Press [MENU] to display the main menu. MENU 2 Use [Cursor K/L] to select "LANGUAGE", then press [ENTER] repeatedly to change the setting. e.g.) digital TV mode - TV SETUP - PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] BACK LIGHT [BRIGHT] COLOR TEMP. [COOL] or OPTION DTVCC SELECT: K , L SET : ENTER ENTER [ENGLISH] [ESPAÑOL] [FRANÇAIS] 3 Press [MENU] to exit. MENU 14 EN