Sharp LC-20SH7U LC-20SH7U Operation Manual - Page 18

WATCHING TV 5 Switching Each Mode You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. 5 Switching Audio Mode This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. 1 Press [INPUT] repeatedly to cycle through analog TV, digital TV, INPUT1 and INPUT2. TV While receiving an MTS broadcast, press [AUDIO] repeatedly to cycle through the available audio channel. INPUT [ANALOG MODE] [DIGITAL MODE] [INPUT1] [INPUT2] • To use the video or S-video input jack on the unit, select "INPUT1". • To use the component video input jack on the unit, select "INPUT2". Note: • When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode. NOW SCANNING AUDIO [MAIN] [SAP] [MONO] MAIN SAP MONO : Outputs main-audio : Outputs second audio program : Outputs mono-audio • The information display will automatically disappear in 10 seconds. DTV 1 Press [AUDIO] to display the currently selected language and the number of available languages. AUDIO KABC A Day of Memories ENGLISH 1/3 CH 95-03 2 Press [AUDIO] repeatedly to cycle through the available audio languages. AUDIO [ENGLISH] [SPANISH] [FRENCH] • Available languages differ depending on the broadcast. "OTHER" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. • The information display will automatically disappear in 10 seconds. Note: • Pressing [AUDIO] does not control external audio device. 16 EN