Sharp LD-26SH3U LD-26SH3U Operation Manual - Page 33

Setting TV channels The following table shows the channels this TV can receive. VHF Channels 2 through 13 UHF Channels 14 through 69 Channel 1 (HRC and IRC mode only) Cable Channels 2 through 125 (STD, HRC, and IRC) (You must subscribe to a cable TV service to receive cable channels.) When you first receive this TV, it has no memory of any channels. To receive channels, perform the EZ Setup (see page E20) after the first power-on, or use "CH Setup" in the Setup menu. Selecting broadcast (Air) or cable TV (Cable) for channel setting It is necessary to set the receiving mode to "Air" or "Cable" channels to receive locally broadcast TV programs. TV AV MENU PC ENTER Channel setting methods There are two ways to set channels. Automatically setting channels you can receive (CH Search) The TV will automatically set the channels it can receive in your area. Setting channels one at a time (CH Memory) This method is for manually setting the channels you want one by one. Use this method if you want to add other channels after using "CH Search". CH VOL 1. Press the TV button to select TV mode. A channel number will appear in the upper-right corner of the screen. 2. Press the MENU button to display the MENU screen. 3. Press the buttons to select "Setup". MENU [Setup] Picture Audio Setup Option CH Setup V-Chip Position Language [English] 4. Press the buttons to select "CH Setup", and press the ENTER button. "CH Setup" screen will be displayed. MENU [Setup...CH Setup] Air/Cable CH Search CH Memory Selecting Air/Cable channels Air Cable(STD) Cable(HRC) Cable(IRC) 5. Press the buttons to select "Air/Cable", and press the ENTER button. 6. Press the buttons to select the desired mode, and press the ENTER button. Continue to Saving broadcast TV channels in the memory (CH Search) or Setting channels manually (CH Memory) on page E33. E32