Sharp LD-26SH3U LD-26SH3U Operation Manual - Page 69

Specifications The analog RGB input connector pin (Mini D-sub connector with 15 pins) No. Function 1 Red video signal input 2 Green video signal input 3 Blue video signal input 4 N.C. 5 GND 6 For red video signal GND 7 For green video signal GND 8 For blue video signal GND 9 +5V 10 GND 11 N.C. 12 DDC data 13 For Hsync signal input 14 For Vsync signal input 15 DDC clock The DVI-D input connector pin (DVI-D connector with 24 pins) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.C. 20 N.C. 9 TMDS data 1- 21 N.C. 10 TMDS data 1+ 22 TMDS clock shield 11 TMDS data 1/3 shield 23 TMDS clock + 12 N.C. 24 TMDS clock - Power management The monitor is based on the VESA DPMS and the DVI DMPM standards. To activate the power management function, the video card and the computer used with it must also conform to these standard. DPMS: Display Power Management Signaling DPMS mode ON STANDBY SUSPEND OFF Screen Display on Display off Power consumption H-sync V-sync 118 W Yes Yes No Yes 1.0 W Yes No No No DMPM: Digital Monitor Power Management DMPM mode ON OFF Screen Display on Display off Power consumption 118 W 1.0 W DDC (Plug & Play) This monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for carrying out Plug & Play functions on the monitor or computer. It transfers information such as degree of resolution between the monitor and computer. You can use this function if your computer is DDC compliant and if it is set so that it can detect the Plug & Play monitor. There are many varieties of DDC due to the differences between systems. This monitor works with DDC2B. E68