Sharp LD-26SH3U LD-26SH3U Operation Manual - Page 47
Adjusting the computer display automatically, for analog signals
UPC - 074000046498
View all Sharp LD-26SH3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Adjusting the computer display automatically (for analog signals) When using the TV as a computer display for the first time or after having changed the system settings during use, perform an automatic screen adjustment. "Clock", "Phase", "H-Pos.", and "V-Pos." in "Fine Sync." of the Setup menu (PC mode) will be set to their optimum states. Note: - When using the TV with a digital connection, automatic screen adjustment is unnecessary. TV MENU AV PC ENTER CH VOL RETURN EXIT MTS MUTE 1. Press the PC button to select the PC (analog) mode. "PC ANALOG" will appear in the upper-right corner of the screen. If "PC DIGITAL" appear, press the PC button again. 2. Display an image that makes the entire screen display light colors (such as a light desktop background). If you are using Windows, use the adjustment pattern on the supplied CD-ROM (see page E48). 3. Press the MENU button to display the MENU screen. 4. Press the buttons to select "Setup". MENU [Setup] Picture Audio Setup Option Auto Sync. Fine Sync. Input Signal Scaling [1] Language [English] 6. Press the buttons to select "On", and press the ENTER button. The screen will go dark and "Adjusting" will be displayed. After a few seconds, the Setup menu will return. 7. Press the MENU or EXIT button to exit the screen. Notes: - If you want to select a screen resolution of 1360 x 768, 1280 x 768, or 1024 x 768 when using the TV with an analog connection, specify the horizontal resolution in "768 Lines" for "Input Signal" in the Setup menu (PC mode). (See pages E47 and E51 for information on using the menus.) - If you want to select a screen resolution of 640 x 480 or 848 x 480 when using the TV with an analog connection, specify the horizontal resolution in "480 Lines" for "Input Signal" in the Setup menu (PC mode). (See pages E47 and E51 for information on using the menus.) - It may not be possible to achieve correct adjustment with the first automatic adjustment. In such a case, try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments can be performed after the automatic adjustment. (See page E47.) - When further fine adjustment is needed. - When the computer's video input signals are Composite Sync or Sync on Green. (Automatic adjustments may not be possible.) - When "Out of Adjust" is displayed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the adjustment pattern or try displaying an image that makes the entire screen very bright.) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. 5. Press the buttons to select "Auto Sync.", and press the ENTER button. E46