Sharp MX-4071 Quick Start Setup Guide - Color Advanced & Essential Series - Page 13
Before Using The Machine, Mx-2651/mx-3051 - waste toner
View all Sharp MX-4071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
BEFORE USING THE MACHINE (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) MX-2651/MX-3051/ MX-3551/MX-4051 (12) (13) (14) (15) (16) (17) (18) (1) Paper feed roller This roller rotates to automatically feed the original. (2) Document feeding area cover Open this cover to remove an original misfeed or clean the paper feed roller. On the MX-2651/MX-3051/MX-3551/MX-4051, this cover is also opened to clean the paper feed roller. (3) Original guides These guides help ensure that the original is scanned correctly. Adjust the guides to the width of the original. (4) Document feeder tray Place the original. Originals must be placed face up. (5) Original exit tray The original is discharged to this tray after scanning. (6) Motion sensor*2 This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from sleep mode (Motion Sensor Mode Only). (7) Main power indicator This lamp lights up when the machine's main power switch is in the " " position. (8) [Power] button Use this button to turn the machine's power on and off. (9) Utility table*1 You can use this as a work platform, or temporarily place originals or a mobile device. • Do not place anything that weighs more than 5kg or otherwise apply a load. • Do not place a container that contains water or other liquid. Risk of fire and electrical shock if the liquid spills and enters the machine. • Working on the table while the machine is in operation may cause poor image quality or other problems. (10) USB port (A type) This is used to connect a USB device such as a USB memory device to the machine. Supports USB 2.0 (Hi-Speed). *1 Peripheral device. For more information, see the User's Manual. *2 Can only be used on the MX-3071/MX-3571/MX-4071. (19) (20) (21) (11) LAN connector Connect the LAN cable to this connector when the machine is used on a network. Use a shielded LAN cable. (12) Scanning area Originals placed in the automatic document feeder are scanned here. (13) Document glass If you want to scan books or other thick originals that cannot be fed through the automatic document feeder, place them on this glass. ► USING THE DOCUMENT GLASS (page 18) (14) Original size detector This unit detects the size of an original placed on the document glass. (15) Toner cartridge This cartridge contains toner. When the toner in a cartridge runs out, replace with new one. (16) Waste toner box This container collects excess toner that remains after printing. (17) Main power switch Use this button to turn the machine's power on and off. When using the fax or Internet fax functions, always keep this switch in the " " position. (18) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide. ► Bypass tray (page 22) (19) Power plug (20) Telephone line jack (LINE)*1 When the fax function of the machine is used, the telephone line is connected to this jack. (21) Extension phone jack (TEL)*1 When the fax function of the machine is used, an extension phone can be connected to this jack. 13