Sharp MX-M1100 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 419
Set the time with the, keys., Press the [START] key, Specify the day., Specify the time hour, minute
View all Sharp MX-M1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 419 highlights
(1) Scan/Special Modes Timer (2) (3) OK Cancel OK Day of the Week Time 10 hh. 00 mm. 4 Set the time with the keys. (1) Specify the day. If you do not wish to specify the day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. (2) Specify the time (hour, minute) Select the time in 24-hour format. (3) Touch the [OK] key. When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure. ☞ CHECKING THE DATE AND TIME (page 9) Press the [START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 5 When scanning finishes, place the next original and press the [START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. • The time can be specified up to a week in advance. • Up to 94 timer transmissions can be stored at once. • If another transmission is in progress when the specified time arrives, the timer transmission will begin after that transmission is finished. • Other transmissions can be performed as usual after a timer transmission is stored. • A timer transmission can be deleted in the job status screen. • If a timer transmission is given priority in the job status screen, the time specification is canceled. The transmission will begin as soon as the job in progress is completed. ☞ GIVING PRIORITY TO A RESERVED JOB (page 169) Fax mode: • Only one timer polling operation can be stored at once. If you wish to poll multiple machines, store a serial polling timer operation. • This function cannot be used in direct transmission mode or when the speaker is used to dial. To cancel timer transmission... Touch the [Cancel] key in the screen of step 4. 99