Sharp MX-M1100 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 637

Enable/Disable Settings The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key to configure the settings. The Enable/Disable Settings control the same parameters as the enable/disable settings in other settings. The settings are linked together (changing one setting changes the other). User Control Disabling of Printing by Invalid User Printing by users whose information is not stored in the machine, such as printing without entering valid user information in the printer driver or printing of a file on an FTP server from the Web pages, can be prohibited. Operation Settings Cancel Auto Clear Timer This setting is used to disable Auto Clear. Disabling of Job Priority Operation The job priority function can be disabled. When this is done, the [Priority] key will not appear in the job status screen. Disabling of Bypass Printing This setting is used to disable bypass printing (printing other jobs ahead of a job that has been stopped* because the paper required for the job is not in any of the trays). * This does not include cases where the paper ran out during the job. Disable Auto Key Repeat This setting is used to disable the auto key repeat function. Disabling of Clock Adjustment This setting is used to prohibit changing of the date and time. Disabling of Covers/Inserts Mode This setting is used to prohibit the use of the covers and inserts function. Disable Manual Finishing (When the Inserter is installed.) This prohibits off-line output. Device Control Disabling of Document Feeder Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the setting is enabled, scanning is still possible using the document glass.) Disabling of Duplex This is used to disable two-sided printing, such as when the duplex module malfunctions. Disabling of Large Capacity Cassette (When a large capacity tray is installed.) This setting is used to prohibit the use of the large capacity tray, such as when it malfunctions. Disabling of Tray Settings This setting is used to prohibit tray settings. Disabling of Bypass-Tray (When a bypass tray is installed.) Use this setting to prohibit the use of the bypass tray, such as when it fails. Disabling of Inserter (When an inserter is installed) This setting is used to prohibit the use of the inserter, such as when it malfunctions. Disabling of Offset (When a finisher or saddle stitch finisher is installed.) This setting is used to disable the offset function. Disabling of Stapler (When a finisher or saddle stitch finisher is installed.) This setting is used to prohibit stapling, such as when the stapler unit of the finisher or the saddle stitch finisher malfunctions. Disabling of Saddle Stitch (When a saddle unit is installed.) Use this setting to prohibit pamphlet stapling, such as when the saddle stitch unit fails. 67