Sharp PG-M15X PG-M15S , PG-M15X Operation Manual - Page 16

Setup & Connections Connecting the Projector Connecting a computer to the projector using the DVI-Analog to VGA adaptor or the DVI-Analog to VGA cable-Analog connection instructions 1 Connect one end of the supplied computer RGB cable using the supplied DVI-Analog to VGA adaptor to the DVI-DIGITAL/ANALOG INPUT 1 port on the projector, or connect the DVI side of the supplied DVI-Analog to VGA cable to the DVI-DIGITAL/ANALOG INPUT 1 port on the projector. 2 Connect the other end of the computer RGB cable or the VGA side of the DVI-Analog to VGA cable to the computer. Secure the connectors by tightening the thumb screws. 3 To use the built-in audio system, connect one end of the supplied PC audio cable to the AUDIO INPUT terminal on the projector. 4 Connect the other end to the audio output terminal on DVI-Analog to VGA cable the computer. Projecting the image DVI-Analog to VGA adaptor When connecting with this method, press INPUT on the remote control or the projector and select the input signal type to INPUT 1 Computer/Analog Computer RGB cable RGB. PC audio cable CAUTION • Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The computer should always be turned on last. Projector • Please read the computer's operation manual carefully. • Refer to page 53 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Projector Dealer or Service Center. 3 PC audio cable 4 1 DVI-Analog to VGA adaptor 2 Computer RGB cable DVI-Analog to VGA cable Computer Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. "Plug and Play" function • This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. • Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. • The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer. 14