Sharp PG-M15X PG-M15S , PG-M15X Operation Manual - Page 17

Setup & Connections Connecting the Projector Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the equipment being connected. Connecting a video source (VCR or laser disc player) using the standard video input 1 Connect the supplied S-video cable to the S-VIDEO INPUT 2 terminal on the projector and the S-video output terminal on the video source, or connect the supplied video cable to the VIDEO INPUT 3 terminal on the projector and the video output terminal on the video source. 2 To use the built-in audio system, connect the supplied AV audio cable to the AUDIO INPUT terminal on the projector and the audio output terminals on the video source. The S-VIDEO INPUT 2 terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image. S-video cable Video cable AV audio cable Projecting the image • When connecting to the S-VIDEO INPUT 2 terminal on the projector, press INPUT on the remote control or the projector and select the input signal type to INPUT 2 S-VIDEO. • When connecting to the VIDEO INPUT 3 terminal on the projector, press INPUT on the remote control or the projector and select the input signal type to INPUT 3 VIDEO. • For higher quality video, you may use the S-VIDEO INPUT 2 terminal on the projector. • If your video equipment does not have an S-video output terminal, use the composite video output terminal. Projector 1 AV audio cable 2 To audio output terminals Video cable To video output terminal S-video cable To S-video output terminal 2 VCR or Laser disc player 1 15