Sharp PG-M15X PG-M15S , PG-M15X Operation Manual - Page 27

Operation Operating the Wireless Mouse from the Remote Control Remote Control/Wireless Mouse Positioning • The remote control and the wireless mouse functions can be used to control the projector within the ranges shown below. • The remote control can be used with the wireless mouse functions to control the mouse operation on the computer connected to the projector. • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ due to the screen material. Controlling the Projector or Using the Wireless Mouse Functions Remote control 23Ј (7 m) 30˚ 45˚ 30˚ Remote control sensor 45˚ 23Ј (7 m) Effective buttons in MOUSE mode Remote control (Front view) Mouse MOUSE CONTROL OPERATION RIGHT-CLICK Remote control (Rear view) 30˚ Remote control Using as a Wireless Mouse • When MOUSE is pressed, the buttons on the remote control light up and the remote control enters MOUSE mode. • During MOUSE mode, the cursor can be used as the pointer. MOUSE mode is for about ten seconds while the buttons are lighting. • When MENU or ENLARGE is pressed, MOUSE mode is released to the normal mode. • The wireless mouse may not operate correctly if your computer is not correctly set up. Refer to the computer's operation manual for details of setting up/installing the mouse driver. • For one-button mouse systems, use either LEFT-CLICK or RIGHT-CLICK. • To conserve battery life, MOUSE stays active for approximately 10 seconds. Reactivate by pressing MOUSE again. LEFT-CLICK 25