Sharp R-2120JK Owners Manual - Page 8

UNPACKING AND INSTALLATION INSTRUCTIONS 5 TOOLS RECOMMENDED FOR INSTALLATION • Phillips Screwdriver • Electric Drill • 1/2", 5/8" and 3/32" Drill Bits • 1-1/2" Wood Bit or Metal Hole Cutter (if metal cabinet is used) • Saw to cut exhaust opening (if needed) • Protective Drop Cloth for product and range - you may also use carton for protection • Scissors • Pencil • Measure • Tape 6 INSTALLATION HARDWARE The INSTALLATION HARDWARE items 1 - 7 are in a small bag. Items 8 - " are packed separately. All items are in a small carton packed below the oven. ITEM NAME QUANTITY PART CODE 1 Wood Screw 5 X 30 mm 6* XTSSD50P35000 2 Toggle Bolt with nuts #10 - 24 X 50 mm 4** LX-BZ0195WRE0 3 Top Cabinet Screw 5 X 60 mm 2 XBRSD50P60000 4 Power Cord Hanger 1 LX-MZB001MRE0 5 Tapping Screw 4 x 12 mm 8 XOTSE40P12000 6 Flat Washer 30 mm diameter 2 XWHSD50-16300 7 Grommet 1 LBSHC0040MRE0 8 Rear Cushion 1 PCUSUB059MRP0 9 Exhaust Damper Assembly 1 FFTA-B005MRK0 ! Scale Plate 2 LANG-B004MRP0 " Grease Filter 2 PFIL-B008MRE0 # Bottom Sash 1 HDEC-B001MRF0 * Must use two - may use remaining four. **May not use all depending on stud location. Figure 4 Parts shown not to common scale. 8