Singer 14T968DC PROFESIONAL 5 Instruction Manual - Page 72
NOTE: Make sure the Upper
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6. Thread the looper area of the machine following the red color coded thread guides 4-10. 7. Place the thread slighty from left and to the right of threading guide . 8. Place the thread slightly from the front and to the back of threading guide . 9. Place the thread through , ,and . 10. Thread the looper eye (A) from front to back. Pull about 4 inches of thread. Position thread into V cutout (B) on threader. Firmly hold thread tail with left hand and pull Threader lever (C) up into place (D). "V" cutout 11. Thread eye of looper. Threader Lever NOTE: Make sure the Upper Looper thread is behind the Lower Looper thread. Three-Thread Overlock (wide-decorative) page 6
6. Thread the looper area of the machine following the red color coded
thread guides 4-10.
7. Place the thread slighty from left and
to the right of threading guide
f
.
8. Place the thread slightly from the
front and to the back of threading
guide
g
.
9. Place the thread through
h
,
i
,and
j
.
10. Thread the looper eye (A) from front to back.
Pull about 4 inches of thread.
Position thread into V cutout (B) on threader.
Firmly hold thread tail with left
hand and pull Threader lever (C) up into place (D).
11. Thread eye of looper.
NOTE: Make sure the Upper
Looper thread is behind the Lower Looper
thread.
Three-Thread Overlock (wide-decorative) page 6
āVā cutout
Threader Lever