Singer 5625 Stylist II Sewing Machine Instruction Manual - Page 48
Blindhem Stitch
View all Singer 5625 Stylist II Sewing Machine manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
BLINDHEM STITCH The blindhem stitch is primarily used for hemming curtains, trousers, skirts, etc. Settings : Presser foot - Blind Foot : Thread Tension Control: AUTO - Regular blind stitch for normal woven fabrics 1 2 Medium to heavyweight fabric Material de peso medio a pesado Tissus moyens et lourds - Elastic blind stitch for soft, stretchable fabrics 1. First finish the raw edge. Do this by turning it under on fine fabrics or overcasting it on medium to heavyweight fabrics. Then turn the hem up the required depth, press and pin in place. 2. Now fold the fabric as illustrated with the wrong side up. Under side Reverso Envers 1 Under side Reverso Envers 2 Fine fabric Material fino Tissus fins Under side Reverso Envers Under side Reverso Envers 3. Place the fabric under the foot. Turn the handwheel counter clockwise by hand until the needle swings fully to the left. It 3 should just pierce the fold of the fabric. If it does not, adjust the guide (B) on the Blindhem Foot (A) so that the needle just pierces the fabric fold and the guide just rests against the fold. NOTE: For a narrower or wider blindhem, first manually adjust the length and width controls to your desired length and width. Then adjust the guide on the foot. Sew slowly, guiding the fabric carefully along the edge of the guide. B A 4. When completed, the stitching is almost invisible on the right side of the fabric. NOTE: It takes practice to sew blind hems. Always make a sewing test first. 4 Top side Cara Endroit 46