Singer Futura Quartet Instruction Manual - Page 19

Zigzag Stitching

Get Singer Futura Quartet PDF manuals and user guides View all Singer Futura Quartet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

ZIGZAG STITCHING SETTINGS :Presser foot - General Purpose Foot :Thread tension control - S The top thread may appear on the bottom depending on the thread, fabric, type of stitch and sewing speed, but the bobbin thread must never appear on the top of the fabric. Under side Top side ADJUSTING STITCH WIDTH AND LENGTH is values set automatically when pattern (No. 03) is set. The stitch length is 2 mm and the stitch width is about 5 mm. is the selection range when setting the value manually. SATIN STITCH This is a closely spaced stitch used for appliqué, bar-tacking, etc. Slightly loosen the top thread tension for satin stitching. Set the stitch length between 0.5 and 2.0, depending on the weight of thread being used. Use a backing of stabilizer to help avoid stitches puckering the fabric. PLACEMENT OF PATTERNS Stitch width of pattern increases from center needle position as illustrated. STITCH LENGTH mm 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 2.0 2.5 3.0 STITCH WIDTH 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Center position 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
19
ZIGZAG STITCHING
The top thread may appear on the bottom depending on the
thread, fabric, type of stitch and sewing speed, but the bobbin
thread must never appear on the top of the fabric.
SETTINGS
:Presser foot - General Purpose Foot
:Thread tension control -
S
is values set automatically when pattern (No. 03) is set.
The stitch length is 2 mm and the stitch width is about 5 mm.
is the selection range when setting the value manually.
ADJUSTING STITCH WIDTH AND LENGTH
PLACEMENT OF PATTERNS
Stitch width of pattern increases from center needle position
as illustrated.
SATIN STITCH
This is a closely spaced stitch used for appliqué, bar-tacking,
etc.
Slightly loosen the top thread tension for satin stitching.
Set the stitch length between 0.5 and 2.0, depending on the
weight of thread being used.
Use a backing of stabilizer to help avoid stitches puckering the
fabric.
Under side
Top side
STITCH WIDTH
STITCH LENGTH
Center position
mm
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0
0.25
0.5
0.75
1.0
1.25
1.5
1.75
2.0
2.5
3.0