Singer Futura Quartet Instruction Manual - Page 46

In the case of a 2 hoop design, where one hoop is stacked on top of the other, position the Guide Lines on the horizontal cross line and the Center Hoop Marking on the vertical cross line. See Fig. 4. Fig. 5 Center Hoop Marking Guide Line Center Hoop Marking 6. The next screen prompts you to input the first of three alignment points, A, B, and C. These alignment points will inform the machine exactly where the crosslines are positioned in the hoop. It is extremely important that the points are accurately input on the cross lines. The machine is awaiting the input of point A. See figure 3. Guide Line Use the shift buttons on the machine to move the hoop, until the needle comes to point A on the cross line, and push the OK button. MULTIPLE HOOP SHIFT BUTTONS AND "CROSS LINE" INDICATOR LIGHTS FOR INPUTTING POINTS A, B, AND C Please Note: The buttons on the machine are lit to indicate the "cross line" positions of the fabric in the hoop. The blinking button is indicating the point to be input. If a mistake is made when entering the points, press the clear button, (twin needle/clear button) to clear the point(s). and then re-enter point(s). 46 Upward Downward Leftward Rightward  A Shift switch OK switch Clear switch  B C