Singer Futura Quartet Instruction Manual - Page 39
Operation Switches When, Embroidery Unit Is Attached - sewing and embroidery machine
View all Singer Futura Quartet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
OPERATION SWITCHES WHEN EMBROIDERY UNIT IS ATTACHED OPERATION SWITCHES START/STOP BUTTON When start/stop button is pushed, machines starts slowly. To stop the machine, push the button again and the machine will stop sewing and the needle stops at its highest position. FORWARD STITCH BUTTON After the embroidery design has been transferred to the machine, the embroidery can be advanced one stitch at a time. Note: The embroidery hoop will move as it is advancing through the design. To advance continuously, press and hold this button. REVERSE STITCH BUTTON To back up through a design that is already in progress, press the Reverse Stitch button. Pressing the button once will reverse one stitch at a time. To reverse continuously, press and hold this button. Design may be reversed all the way back to the first stitch of the design. LED INDICATOR Green light indicates machine is ready to start. Red light indicates machine is operating. Flashing red light indicates a problem or an error. * Flashing for 2 - 3 seconds shows that an incorrect operation was made. * Continuous flashing indicates that the machine malfunctions. LED indicator Forward stitch button Reverse stitch button Start/stop button (For embroidery only) THREAD TENSION CONTROL Set it at "E" for embroidery to loosen thread tension. You may wish to re-adjust thread tension according to the type of fabric and thread being used. NOTE: When sewing designs created by the software for Photo Stitch (optional) it is recommended to decrease the thread tension toward "0" and activate the "Speed limiter", by checking the box in Machine navigator, before sending the design to the machine. This ensures the best performance of the machine. 39