Singer One Instruction Manual 9 - Page 25

127-3 & 128-3 To Adjust the Ruffler for Group Plaiting and Gathering The ruffler can be adjusted for group plaiting by lifting the adjusting lever (E Fig. 32) and moving it to the right so that the top of the projection (D, Fig. 32) engages the small slot indicated by the star on the adjusting lever. This should be done at the points where you wish to make the space between the plaits. The ruffler will then stop and plain stitching will be made. When the desired space has been made, adjust the lever (E) so that the projection (D) enters either the slot marked "6" or the slot marked "12." By alternately making groups of plaits and plain spaces, as shown in Fig. 32, very attractive work can be produced. To Oil the Ruffler Occasionally apply a drop of oil to the working parts of the ruffler at each of the places indicated by arrows in Fig. 32. After oiling, operate the ruffler on a waste piece of material to prevent the oil soiling the work. If the ruffler does not plait evenly, a drop of oil may remedy the trouble. SINGER Needles should be used in SINGER Machines. These Needles and their Containers are marked with the Company's Trade Mark "SIMANCO"* Needles in Containers marked "FOR SINGER MACHINES" are NOT SINGER made Needles. FIG. 32. Table of Contents Previous Page | Next Page 25