Singer One Instruction Manual 9 - Page 5

127-3 & 128-3 To Ensure Perfect Action of the Machine To Remove the Shuttle The balance wheel must always turn over toward the operator. Do not run the machine with the presser foot resting on the feed without cloth under the presser foot. Do not run the machine when both shuttle and needle are threaded unless there is material under the presser foot. Draw toward you the front slide in the bed of the machine and turn the balance wheel over toward you until the shuttle comes full under the opening. Press the forefinger of the right hand upon the shuttle ejector as shown in Fig. 4, this will raise the shuttle so that it can be easily taken out. Turn the open end of the shuttle downward and the bobbin will drop out. Do not try to help the machine by pulling the fabric lest you bend the needle. The machine feeds the work without assistance. Both slides over the shuttle should be kept closed when the machine is in operation. FIG. 4. REMOVING THE SHUTTLE Table of Contents Previous Page | Next Page 5