Sony AIR-SA15Ti Operating Instructions (AIRSA20PK) - Page 25

Operations Press S-AIR MODE on the remote repeatedly until the desired S-AIR mode indicator lights up in the display. The default setting is underlined. MULTI SOURCE: Select this setting to listen to different sound sources on each sub unit. PARTY: Select this setting to listen to the same sound source on multiple sub units. To select the S-AIR mode from the system menu 1 Press SYSTEM MENU on the unit. 2 Press TUNING/SELECT +/ on the unit repeatedly until "MODE" appears, then press ENTER on the unit. 3 Press TUNING/SELECT +/ on the unit repeatedly to select "MULTI" or "PARTY," then press ENTER on the unit. The selected S-AIR mode appears on the display. To check the S-AIR mode when the display of the main unit is turned off Press DISPLAY on the remote. Notes  When you change the S-AIR mode, the iPod channel is automatically selected for the connected sub units.  When connecting the main unit to an S-AIR sub unit (such as the AIR-SA10) which is not compatible with the MULTI SOURCE mode, set the main unit to the PARTY mode. You can then select the S-AIR channel from the S-AIR sub unit. Listening to iPod music using the S-AIR connection Use the sub units to listen to the music of an iPod connected to the main unit. You can control the connected iPod from either the main unit or the sub units. To use an iPod, refer to the user's guide of your iPod. Using the main unit 1 Place an iPod on the iPod connector as shown below. Now, you are ready to listen to the connected iPod using the sub units. 2 Select the iPod channel. When the S-AIR mode is set to "PARTY": Press PARTY CH on the remote repeatedly until "iPod" appears in the display. When the S-AIR mode is set to "MULTI SOURCE": The iPod channel is internally activated. Go to step 3.  Continued 25GB