Sony AIR-SA15Ti Operating Instructions (AIRSA20PK) - Page 39

On safety, On placement, On heat buildup, On the speaker system, Cleaning the cabinet

Page 39 highlights

Others On safety  Completely disconnect the power supply cord and the power cord from the wall socket (mains) if the main unit and the sub units are not going to be used for an extended period of time. When unplugging the units, always grip the plug. Never pull the cord itself.  Should any solid object or liquid get into the main unit and the sub units, unplug the units, and have them checked by qualified personnel before operating them again.  The power supply cord and the power cord can be changed only by a qualified service facility. On placement  Do not place the main unit and the sub units in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light.  Be careful when placing the main unit and the sub units on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. On heat buildup  Heat buildup on the main unit and the sub units during operation is normal and is not cause for alarm.  Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.*  Do not obstruct the ventilation holes.* * The sub units only. On the speaker system* This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait about 15 to 30 minutes, and turn it back on. If there is no improvement, move the unit far away from the TV. * The sub units only. Cleaning the cabinet Clean the cabinet with a soft dry cloth. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. 39GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

²·
GB
Others
On safety
Completely disconnect the power
supply cord and the power cord from
the wall socket (mains) if the main unit
and the sub units are not going to be
used for an extended period of time.
When unplugging the units, always
grip the plug. Never pull the cord itself.
Should any solid object or liquid get
into the main unit and the sub units,
unplug the units, and have them
checked by qualified personnel before
operating them again.
°e power supply cord and the power
cord can be changed only by a qualified
service facility.
On placement
Do not place the main unit and the
sub units in an inclined position or
in locations that are extremely hot,
cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to
vibration, direct sunlight or a bright
light.
Be careful when placing the main unit
and the sub units on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
On heat buildup
Heat buildup on the main unit and the
sub units during operation is normal
and is not cause for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.*
Do not obstruct the ventilation holes.*
* °e sub units only.
On the speaker system*
°is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
about 15 to 30 minutes, and turn it back
on.
If there is no improvement, move the
unit far away from the TV.
* °e sub units only.
Cleaning the cabinet
Clean the cabinet with a soſt dry cloth.
Do not use any type of abrasive pad,
scouring powder, or solvent, such as
thinner, benzine, or alcohol.