Sony AIR-SA15Ti Operating Instructions (AIRSA20PK) - Page 30
Changing the display, Using the main unit
View all Sony AIR-SA15Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Changing the display Using the main unit To view the information on the display Press DISPLAY on the remote. Using the sub units To change the information on the display while the sub unit is on Press DISPLAY on the unit. Each time you press the button, the display changes as follows: When the sub unit is connected to the main unit: Information of the connected main unit1) Model name of the connected main unit2) Clock2) ... When the sub unit is not connected to the main unit: "S-AIR" "UNLINKED"2) Clock2) ... 1) Depending on the iPod model you are using, up to 16 characters of the following information can be viewed, for example, while playing the iPod. Track name Artist name Album name Elapsed playing time of the track Characters that cannot be displayed appear as "_". When listening to the radio, the frequency is displayed. 2) Displayed for about 8 seconds. To turn off the display of the sub unit When the sub unit is turned off, the clock is displayed. You can turn off the clock display to minimize the amount of power consumed (Power Saving Mode). Press DISPLAY on the unit when the clock is displayed. Press the button again to display the clock. Note Regardless of the selected S-AIR mode, when the same S-AIR channel is selected on multiple sub units and you change the display of any one of them, the display on all sub units will change (only when the information of the connected main unit is displayed). 30GB