Sony BSV-M1 Operating Instructions - Page 11

Basic Operations The control panel (which consists of an LCD panel and control buttons on the front surface of the device) and browser are used to perform basic server operations. Control Panel Use the control panel to make the system and network settings, to restart or shut down the system, and to display the system's operational status. For details on the control panel menu, refer to Chapter 3, "Using the Control Panel" (page 24). By using the control panel, the following tasks can be accomplished. • Configure network related settings • Restart or shut down the system • Set messages to display on the LCD panel when the server is idle • Check system's operational status • Check the usage condition of the hard disk. Note Some of the setups and operations such as, network settings, restart/shutdown, system status and hard disk condition monitoring can be performed through a browser. Operations of the Control Buttons The following buttons are on the control panel. Use these buttons to operate the Control Panel Menu. [MENU] button The Control Panel Menu appears. b button, B button Moves the cursor left and right. These buttons are used to select values and to specify the positions of letters and numbers. v button, V button These buttons are used to select a menu and to input letters and numbers. • Press v to move to the previous menu, and V to move to the next menu. • Press v to cycle forwards through letters and numbers one at a time, and V to cycle backwards. [ENTER] button This button is used to finalize the displayed menu or value, and to execute operations. • Finalizes or executes the displayed menu or operation. • Saves the values. Note Input a space to delete an unwanted character. [CANCEL] button Aborts the current operation and returns to the previous menu. 11 Chapter 2 Basic Use