Sony BSV-M1 Operating Instructions - Page 26

Network 2 Use the V and v buttons to select the first character of the password. The character appears in the lower row. Enter Password? a 3 When the desired character appears, press the B button. Enter Password? *a The first character is set. The characters input are displayed as asterisks. Set the password as up to 8 characters. The characters are displayed in the following order. a-z, A-Z, 0-9, (space), symbols 4 Enter the next character in the same manner, then press the B button. 5 After displaying the last character, then press the [ENTER] button. Password OK! The password is authenticated, then "Network" appears in the Configuration Menu. Network Use this item to make network settings. Items that can be set are as follows, but vary according to the DHCP settings. • Host name • DHCP • IP address (when DHCP is disabled) • Subnet mask (when DHCP is disabled) • Default gateway (when DHCP is disabled) • DNS (when DHCP is disabled) Caution Input the host name and IP address after confirming that there are no other machines with the same host name and IP address on the same network. No error message is displayed to alert you if there is more than one machine with the same parameters set. Take care not to set the same parameters as another machine, as this can result in malfunction. Notes • Network settings can also be configured in the BSV-M1 Administration Menu. • You can check the server's IP address at any time by displaying it when the server is idle. This is convenient when the server is using an IP address assighed by a DHCP server. 1 Enter the Configuration Menu and display "Network". Network 2 Press the [ENTER] button. "Hostname" appears, and a cursor appears under the first character of the host name. Hostname? MACHINE-NAME 26 Chapter 3 Using the Control Panel