Sony BSV-M1 Operating Instructions - Page 20
Saving Settings (Backup), Shutting Down the System, Shutting Down the System from the Control Panel
UPC - 027242601611
View all Sony BSV-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Saving Settings (Backup) After changing settings from the control panel or a browser, make sure you save (back up) the settings. For more information regarding saving settings, refer to "Status" (page 36) in Chapter 4, "Using the BSV-M1 Administration Menu". Shutting Down the System The system can be shut down either from the control panel or a browser. Caution • After the system is shut down, the server power goes off automatically. • When shutting down the system, do not use the power switch on the rear panel. • Confirm that the system is not backing up data, and then shut it down. If the system is shut down during data backup, data could be lost. • The system can be configured so that it shuts down automatically at a specified day and time on a weekly basis. Refer to "Shutdown" (page 38) in the "Maintenance Menu" section of Chapter 4, "Using the BSV-M1 Administration Menu". Shutting Down the System from the Control Panel 1 When the server is idle, press the [MENU] button for two seconds. 2 Press the [ENTER] button. If you are asked for a password, enter the password. Configuration Network Note If the administrator password has not been changed from "admin", password verification is skipped. 3 Press the V button twice to display "Shutdown System", then press the [ENTER] button. Shutdown System A confirmation message appears. [ENTER] to shutdown [CANCEL] to abort Note If you want to restart the system, first display "Reboot System", then press the [ENTER] button twice. 20 Chapter 2 Basic Use