Sony BVMF170A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 88
Operations, Selecting Display Mode
View all Sony BVMF170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 4 Operations Operations 4 Chapter Selecting Display Mode This monitor applies high-contrast to the picture and reproduces accurate color by displaying the interlace signal in progressive mode by the I/P conversion or the PsF·progressive signal in progressive mode without the I/P conversion. You can select interlace display mode according to the input signal or the object to evaluate the picture. Interlace display mode: The picture is displayed in interlace mode without I/P conversion processing. The picture near the original quality of the input signal is monitored. Notes • When a 1080/241) P (PsF) or 1080/25P (PsF) input signal is displayed in progressive mode, the frame rate for display is 721) Hz or 75 Hz to obtain flickerless display. • When the input signal is 1080/241) PsF or 1080/25PsF and 1080I is set in the 1080I/PsF menu of the Channel Configuration menu, the frame rate for display is 481) Hz or 50 Hz. • The luminance is reduced owing to the principle of operation in the interlace display mode. However, on this monitor the normal luminance is set by increasing the value of gain. For this reason, in the interlace display mode, the range of the contrast adjustment is different from the normal level, and the luminance may be reduced according to the setting of the contrast. • The picture is not displayed in interlace mode in the following cases: - When Side by Side is set to On - When Pixel Zoom is set to on 1 For selecting the interlace display mode, set Native Scan (page 67) to On in the Function Setting menu or by pressing the NATIVE SCAN button of the controller. 2 Set Interlace to On in the Function Switch menu (page 67) of the Function Setting menu, or pressing the Interlace button2) on the controller. iiFunction Switch Aperture: Mono: Blue Only: R Off: G Off: B Off: Chroma Up: Interlace: xxx xxx xxx xxx xxx xxx xxx xxx 2/5 v V For the input signal to display in frame mode and interlace mode, see "Picture Frame Display" on page 122. 1) Also compatible with a frame rate of 1/1.001. 2) Interlace is assigned to a function button of the controller in the Function Key menu (page 83) of the Controller menu. 88 Selecting Display Mode