Sony BVMF170A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 99
Displaying the Monitor Status
View all Sony BVMF170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 4 Operations Displaying the Monitor Status Page When Status has been assigned to a function button of the controller, the setting status, display mode and input signal information of the currently displayed video signal are displayed on the monitor status pages. For how to assign a function to a function button, see "Assigning a Function to a Function Button" (page 101). Input Port: Displays Input Port and Input No. set in the Channel Configuration menu. RGB Range: Displays RGB Range set in the Channel Configuration menu. 1080I/PsF: Displays 1080I/PsF set in the Channel Configuration menu. Scan Mode: Displays the selected scan mode. Aspect Mode: Displays the selected aspect ratio. Interlace Display: Displays On/Off of the interlace display. Page 2/3 Information on the picture adjustments is displayed. Notes • To assign Status to a function button of the controller, use the controller with software version 1.6 or higher. • Pixel Zoom is not set to on when the monitor status page is displayed. 1 Press the Status button on the controller to set it to On. Page 1/3 of STATUS display is displayed. 2 Select the STATUS page you wish to view using the UP/DOWN button on the controller. You can select the page from among 1/3, 2/3 and 3/3. For the contents of each page, see below. To cancel the display of the STATUS page Press the Status button on the controller again. Page 1/3 Information on the setting status of the input signal and the display mode is displayed. STATUS (Input / Display Mode) 1/3 v V CH: Detected Signal: Format: Input Port: RGB Range: 1080I/PsF: 01 "PROG1" 1080/60I 4:4:4 RGB 10bit Option1/Input1 Limited 1080I Scan Mode: Aspect Mode: Interlace Display: Native Aspect Correct 16:9 ON STATUS (Picture Configuration) CH01 Color Profile: BVM EBU Color Space: EBU Gamma: CRT BVM Color Temp: User1 2/3 v V Picture Preset: Chroma: Bright: Contrast: Matrix: Preset1 1000 000 1000 ITU-R BT.709 Color Profile: Displays Color Profile set in the Channel Configuration menu. Color Space: Displays Color Space set in Color Profile Gamma: Displays Gamma set in Color Profile Color Temp: Displays Color Temp set in the Channel Configuration menu. Picture Preset: Displays Picture Preset set in the Channel Configuration menu. Chroma: Displays the Chroma value of the selected Picture Preset. Bright: Displays the Bright value of the selected Picture Preset. Contrast: Displays the Contrast value of the selected Picture Preset. Matrix: Displays Matrix set in the Channel Configuration menu. Page 3/3 When the SDI signal is input The same information as that of SDI Payload ID Status in the System Status menu is displayed. CH: Displays the currently selected channel number and channel name. Detected Signal: Displays the signal system whose format is detected. Format: Displays Format set in the Channel Configuration menu. 99 Displaying the Monitor Status Page