Sony CCD TRV16 Service Manual - Page 99
Color Reproduction Adjustment, Note 1
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
6. Color Reproduction Adjustment Adjust the color Separation matrix coefficient so that proper color reproduction is produced. Subject Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value Color bar chart standard picture frame Video output terminal Vectorscope F 34, 36, F5, F6 All color luminance points should settle within each color reproduction frame. Switch setting: 1) NIGHT SHOT switch OFF R-Y R MG YL B-Y B Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 2, address: 01, set data: 3D, and press the PAUSE button of the adjusting remote commander. 3) Select page: F, address: 25, set data: 3F, and press the PAUSE button of the adjusting remote commander. 4) Adjust the GAIN and PHASE of the vectorscope, and adjust the burst luminance point to the burst position of the color reproduction frame. 5) Change the data of page: F, address: 34, 36, F5 and F6, and settle each color luminance point in each color reproduction frame. Note 1: Be sure to press the PAUSE button of the adjusting re- mote commander before changing the addresses. If not, the new data will not be written to the memory. 6) Press the PAUSE button of the adjusting remote commander. Burst positon CY G Fig. 5-1-10. Processing after Completing Adjustments 1) Select page: 2, address: 01, and set data: 00, and press the PAUSE button of the adjusting remote commander. 2) Select page: 0, address: 01, and set data: 00.