Sony CMT-CP333 Operating Instructions - Page 10

Programming the CD tracks (continued) To Cancel Program Play Add a track to the end of the program Erase the entire program Do this Press PLAY MODE repeatedly until "PGM" disappears from the display. Do steps 3 through 5 with Program Play stopped. Press CD x with Program Play stopped. Tips • The program you made remains after Program Play finishes. To play the program again, switch the function to CD, and then press CD u (or N on the remote). • "--.--" appears in the display when the total program time exceeds 100 minutes, or when you select a track whose number is 21 or over. Using the CD display Press DISPLAY on the remote repeatedly. When a CD TEXT disc is loaded, you can check the information recorded on the disc, such as the titles. The display changes as follows: During normal playback Current track number and elapsed playing time of the track t Current track number and remaining playing time of the track t Remaining playing time of the current CD t Track title of the current track* t Clock display t Current track number and elapsed playing time of the track t ...... While the CD is stopped Total number of tracks and total playing time of the current CD t Disc title* t Clock display t Total number of tracks and total playing time of the current CD t ...... * If a CD that has no title is loaded, nothing appears. When the CD contains 21 tracks or more, CD TEXT is not displayed for each track starting with the 21st. Note When the 1 DISC indicator goes off, the remaining playing time of the current disc will appears as "--.--". 10